General Specification of DC Motor
Insulation Resistance
At normal ambient temperature and humidity, the insulation resistance can be 20 MΩ or more. A 500VDC megohmmeter is used to test the resistance between the windings and the frame after the motor operates at its rated conditions.
Insulation Voltage
Under typical ambient conditions, the motor can endure 1.5kV (2kV for three-phase 400V) at 50/60Hz between the windings and the frame for one minute following rated operation.
Temperature Rise
When the motor is running, the temperature rise measured by the resistance method should be below 80°C.
Insulation Class
Class F (180°C)
Operating Temperature
-10°C to 40°C (without freezing)
Operating Humidity
Non-condensing environment
Overall dimensions
Motor voltage, power and speed will be customized accrding to his requestment under the allowed circumstance of adoptable dimension.
Reduction Motor Max Allowable Torque .
Wiring diagram of motor
Stanclard length of lead wire: 300mm+ 10,model:UL1015 tpye:AWG20;lead wire length,model will be customerised by dient requestmant under allowed circumstamce
of adoptable dimension
